Power: 315 Watt
Input voltage: 120-240VAC ± 10%
Input Frequency: 50-60Hz
Input power: 335W ± 3%
Input current: 1.43A
Minimum power factor: ≥0.97
THD: ≤10%
Wave crest coefficient: ≤1.7
Pulse Voltage: 4-6KV
Max humidity: 95%
Pulse Voltage: 4-6KV
Ignition Voltage: 3-5KV
Max ballast shell temperature: 75℃/167 ℉
Ambient temperature: -25- + 50 ℃ / -4- + 104 ℉
Length: 17.52”
Width: 10.39”
Height: 5.12”
Weight: 2.75Kgs (6.08LB)
Performance Data
Light output(Lumens @ 100 Hours) 37000
Lumens per Watt (lm/w) 120
Rated life (Hours @ 10 Hour / start) 15000
Correlated Color Temperature (K) 3100
Color Rendering Index (CRI) or (Ra) ≥90
Photon flux(µmol/s) 570
Burning Position U
_______________________________________
Performance Data
Light output(Lumens @ 100 Hours) 33000
Lumens per Watt (lm/w) 110
Rated life (Hours @ 10 Hour / start) 15000
Correlated Color Temperature (K) 4200
Color Rendering Index (CRI) or (Ra) ≥98
Photon flux(µmol/s) 540
Burning Position U
________________________________________
Physical Data /Requirements
Max.Base Temperature (℃) 250
Max.Bulb Temperature (℃) 350
Luminaire Type Open/Enclosed
________________________________________
Lamp Electrical Date/Requirements:
ANSI Standard Ballast C182/0 or Electronic Ballast
Lamp Wattage (W) 315W
Lamp Operating Voltage(V) 100V
Lamp Operating Current(Amps) 3.15A
Min.Open Circuit Voltage (RMS) 198V
Min.Pulse Width @ 2700V(Microseconds) 1.9
Min.Pluse Rate per 1/2Cycle –
Pulse position (Electrical Degrees) –
Extremely high PAR levels, high 92cri, 33,000 starting lumens (105Lm / W) high 90% lumen maintenance at 8,000 h / high 85% of expected service life (h): 20,000
Reflector: high-quality German aluminum foil, specular reflection design, reflectivity up to 98%, provides good indoor growth light
The coverage area: 4FTX4FT, higher harvest, and lower cost
Degradation Time: 25,000 hours around
Full light spectrum much closer to natural sunlight than typical high-intensity discharge (HID) systems.
While no light source exactly replicates the sun, our CMH lights are the industry’s best replica of natural sunlight, providing a very consistent and broad spectral output with high energy (µmole/sec).
Based on the type of plant, CMH grow light fixture lamps are used by many industry leaders, either as an all-purpose, single-lamp source, or as a ‘middle stage’ lamp for crops grown under multiple lamp types.